Filter
Top Products
ATA COMMAND BLOCK AND SET DESCRIPTION SSD-DXXX(I)-4210 DATA SHEET
SILICONSYSTEMS PROPRIETARY
This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.
All unauthorized use and/or reproduction is prohibited.
4210D-03DSR PAGE 62 FEBRUARY 2, 2009
Set Sleep Mode — 99h, E6h
The Set Sleep Mode command allows the host to set the device in sleep
mode. When the onboard controller transitions to sleep mode, it clears the
BSY bit and issues an interrupt. The device interface then becomes inactive.
Sleep mode can be exited by issuing either a hardware or software reset.
Table 48: Set Sleep Mode — 99h, E6h
Register
D
7
D
6
D
5
D
4
D
3
D
2
D
1
D
0
Feature X
Sector Count X
Sector Number X
Cylinder Low X
Cylinder High X
Drive Head X X X Drive X
Command 99h or E6h