Filter
Top Products
C
ONFIGURING
THE
S
WITCH
2-70
CLI – The following example adds the string “spiderman” with read/write
access.
Specifying Trap Managers
You can specify up to five management stations that will receive
authentication failure messages and other trap messages from the switch.
Command Usage
• You can enable or disable authentication messages via the Web
interface.
• You can enable or disable authentication messages, link-up-down
messages, or all notification types via the CLI.
Web – Click SNMP/SNMP Configuration. Fill in the Trap Manager IP
Address box and the Trap Manager Community String box, mark Enable
Authentication Traps if required, and then click “Add.”
Console(config)#snmp-server community spiderman rw 3-4 3
Console(config)#