Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
3-104
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
switchport gvrp
Use this command to enable GVRP for a port. Use the no form to disable
it.
Syntax
switchport gvrp
no switchport gvrp
Default Setting
Disabled
Command Function Mode Page
Interface Commands
switchport gvrp Enables GVRP for an interface IC 3-104
switchport forbidden vlan Configures forbidden VLANs for an
interface
IC 3-102
show gvrp configuration Displays GVRP configuration for
selected interface
NE,
PE
3-105
garp timer Sets the GARP timer for the selected
function
IC 3-106
show garp timer Shows the GARP timer for the
selected function
NE,
PE
3-107
Global Commands
bridge-ext gvrp Enables GVRP globally for the
switch
GC 3-108
show bridge-ext Shows bridge extension configuration PE 3-108