Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
3-130
map ip dscp (Global Configuration)
Use this command to enable IP DSCP mapping (i.e., Differentiated
Services Code Point mapping). Use the no form to disable IP DSCP
mapping.
Syntax
map ip dscp
no map ip dscp
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• IP Precedence and IP DSCP cannot both be enabled. Enabling one of
these priority types will automatically disable the other type.
Example
The following example shows how to enable IP DSCP mapping globally:
map ip dscp (Interface Configuration)
Use this command to set IP DSCP priority (i.e., Differentiated Services
Code Point priority). Use the no form to restore the default table.
Syntax
map ip dscp dscp-value cos cos-value
no map ip dscp
• dscp-value - 8-bit DSCP value. (Range: 0-255)
Console(config)#map ip dscp
Console(config)#