Filter
Top Products
8. If your device warns that the software comes from an
unknown publisher, tap Yes to continue installation.
9. When installation is complete, remove the device from the
cradle. Soft reset the device by pressing the reset button.
IMPORTANT! Soft reset your device, or some icons will not
appear properly.
STEP 3: Insert the Card
Insert the card into your device’s SDIO slot. Make sure the card
is positioned correctly. Do not insert the card upside-down or
force the card in too hard.
IMPORTANT! To remove the SDSC, push the card
completely into the slot. After the card springs back,
you can safely remove the card. Do not pull the card
out without pushing first, or you can damage the
connector the next time you insert a card.
The SDIO slot of some devices will draw power from
the device’s main battery whenever an SD/SDIO card
is inserted (regardless of the card’s manufacturer),
even when the device is turned off. If you have one
of these devices, Socket Mobile recommends that you
remove
the card whenever the card is not in use.
For more information, please visit:
www.socketmobile.com/support/downloads/data-
collection/series3/
CHAPTER 2: SETUP FOR WINDOWS MOBILE 11