Filter
Top Products
Page 14
7. LAN DHCP Settings - The LAN DHCP Settings screen allows
you to select whether or not to use the DHCP Server in the
SonicWALL TZ 150 Wireless to automatically distribute IP
addressing information to computers and other network devices
on your LAN.
Click Next.
8. WLAN 802.11b/g Settings - The WLAN 802.11b/g Settings
screen allows you to configure your wireless network settings.
Click Next.
Enable
DHCP
Server on
LAN
Leave this checkbox checked to use the DHCP server
in the SonicWALL TZ 150 Wireless appliance.
Do not select this option if you already have a DHCP
server on your network, or if you want to require your
network clients to have static IP addresses.
LAN
Address
Range
If you enabled the DHCP Server, enter a range of IP
addresses in the same subnet as the LAN IP address,
or leave the default range unchanged. The default
DHCP range will work for most installations
SSID For security reasons, change this setting. Enter a
unique name to identify the wireless connection. The
SSID can contain up to 32 numbers and letters.
Radio
Mode
Select the transmission standard to use. The default,
Mixed, works for most office and home settings.
Country
Code
Select the country where you are deploying this secu-
rity appliance. This configures the channels used to
comply with regulations in your country.
Channel Select the broadcast channel you want the security
appliance to use. The default, AutoChannel automati-
cally detects the channel with the least interference.
See “SonicWALL TZ 150 Wireless Security Appliance
Regulatory Statement and Safety Instructions” on
page 33 for information on authorized channels.