Filter
Top Products
15
Location and Function of Controls
Overview
e (Memory Stick) key
This key does not work in the unit.
f FREEZE key
This key freezes the projected image.
Press again to unfreeze the image.
(available for computer signals only)
g AIR SHOT key
This key does not work in the unit.
8 Keys that emulate a mouse
This key does not work in the unit.
i ENTER key
j FUNCTION 1/2/3 keys
This key does not work in the unit.
k Strap holder
Attaches a strap.
l CONTROL S OUT jack (stereo
mini-jack)
Connects to the CONTROL S IN jack on
the projector with the connecting cable
(not supplied) when using the Remote
Commander as a wired one. In this case,
you do not need to install the batteries
since the power is supplied via the
CONTROL S IN jack on the projector.
m RESET/ESCAPE key
Functions as a RESET key.
Resets the value of an item to its factory
preset value or returns the enlarged
image to its original size. This key
functions when the menu or a setting
item is displayed on the screen.
n D ZOOM +/– key
Enlarges the image at a desired location
on the screen.
o Arrow keys (M/m/</,)
p MENU/TAB key
Functions as a MENU key.
q APA (Auto Pixel Alignment) key
Automatically adjusts a picture to its
clearest while a signal is input from a
computer.
For details, see “Smart APA” in the SET
SETTING menu on page 34.
r VOLUME +/– keys
This key does not work in the unit.
s LENS key
This has the same function as the LENS
CONTROL key on the control panel.
t PJ/NETWORK (Projector/
Network) selector switch
Set this switch to PJ always.
u COMMAND ON/OFF switch
When this switch is set to OFF, no key
on the Remote Commander function.
This saves the battery power.
v Infrared transmitter