Filter
Top Products
Miscellaneous
Error Messages
55
Printer window display
Status Monitor
In the following table, the upper error messages are
displayed on the printer window display and the lower
error messages are displayed on the status monitor.
After removing the causes of errors
Push the READY button so that the printer is reset to
print mode (both ON/STANDBY and READY
indicators light in green).
Errors related to paper
Error message Causes/remedies
Out of paper
(Auto sheet feeder try is
empty.)
• Paper is not loaded in the auto
sheer feeder tray.
tLoad paper in the auto sheet
feeder tray. (page 12)
• The auto sheet feeder tray is not
set correctly.
tCheck that the auto sheet
feeder tray is completely
inserted. (Refer to “Attaching
the Auto Sheet Feeder Tray”
described in the printed Setup
Manual.)
Wrong paper size
(Paper size does not
match up with paper
size setting.)
The printer has been designed to use
size A4 paper. Do not use paper other
than size A4 paper.
Paper feed error
(A Paper Feed error has
occurred.)
• The printer is not in print mode.
tMake the ON/STANDBY and
READY indicators light in
green. (page 10)
• The Auto sheet feeder tray is
empty.
tLoad the paper. (page 12)
• Paper other than size A4 paper is
loaded.
tBe sure to use size A4 paper.
• The paper guides (vertically and
horizontally) are not correctly set.
tSet them correctly. (page 12)
• Too much paper is loaded.
tDo not exceed the number of
sheets which the automatic
paper feed tray can hold.
(page 11)
• Warped paper is being used.
tTry to make the warped paper
lie flat and load it again.
(page 12)
• Folded or wrinkled paper is being
used.
tDo not use folded or wrinkled
paper. (page 12)
• Paper is stuck.
tRiffle the paper and load it
again. (page 12)
• The printer is not placed on a flat
surface.
tPlace the printer on a flat
surface.
Paper jam
(Paper jam)
The paper is jammed.
tRemove the jammed paper.
(page 56)