Filter
Top Products
Miscellaneous
Error Messages
57
When the paper fed from the auto sheet
feeder tray stops halfway
1
Remove the auto sheet feeder tray, and check
whether or not the paper has jammed near the back.
2
If the jammed paper can be easily removed, pull the
jammed paper out slowly.
If you cannot remove the jammed paper from the
outside, remove it according to instructions in step,
and after, in “When the paper is jammed inside the
printer.”
When the paper is jammed inside the
printer
1
If you can remove the jammed paper from the
feeding input or output slot, pull the jammed paper
straight out slowly.
If you cannot remove the jammed paper from the
outside, go to the next step.
2
Set the printer to standby mode by pushing the ON/
STANDBY button and turn the power of the printer
off by setting the main power switch to the off side.
3
Remove the auto sheet feeder tray.
4
Push both the right and left eject buttons to open the
main cover.
5
If the head cleaning unit is open, push the head
cleaning unit without touching the print head to
close it.
Eject buttons
Head cleaning unit