Filter
Top Products
Getting help
Troubleshooting
Sony Notebook User Guide
80
nN
7 PressthearrowkeystoselectExit (Save Changes) and then press Enter.
The message Save configuration changes and exit now? appears.
8 Check that [Yes] is selected, then press the Enter key. The computer will restart.
My computer does not shut down
It is best to shut down your computer using the Shut Down command on the
Windows
®
Start menu. Using other methods, including those listed here, may result in
loss of unsaved data. If the Shut Down command does not work properly,follow these
steps:
Restart the computer by pressing <Ctrl>+<Alt>+<Delete> and by choosing Shut
Down.
If this does not work, press the power button and hold it for at least four seconds.
This turns off the power.
Unplug the computer from the AC adapter and remove the battery pack from your
computer.
My computer locks up
If you suspect one application is locking your system, you can try to stop it. To do
this, press <Ctrl>+<Alt>+<Delete> once, click Task M ana ge r, select the
application or the process that you think is locking your system in the list,and then
click End Task.
If the above method does not work or you do not know which application is
locking your system, try restarting the computer. On the Windows
®
taskbar, click
the Start button, click Shut Down,andthenselectShut Down in the list and click
OK.
If the above method does not work, press the power switch and hold it for at least
four seconds. This turns off the power.