Filter
Top Products
MODE SELECT 6.Command Specification
SONY AIT-5 drive SDX-1100V series Ver.1.0 6-53
PONEJ: This bit is recorded in drive’s EEPROM, and it effects the drive itself. (Not Supported)
0 - Power On immediate Eject disable. If this bit set to 0, then the cassette will stay in the drive when power is
applied. (default)
1 - Power On immediate Eject enable. If this bit set to 1, then cassette will be immediately ejected when power
is applied to the drive.
SPAN: The SPAN field is in binary notation. This field is unchangeable. When MIC cartridge is inserted, this field is
set to 0Ah (00001010b), other values are prohibited.
SysLogAlive:
0 0 - System logs located only on tape. (default for SDX-T3N)
1 1 - System logs located only in MIC. (default for MIC cartridge)
The SysLogAlive-bits will be set to 00B for non-MIC cartridges, and to 11B for MIC cartridges. Other bit
combinations are prohibited.
MIC: This bit is effective for Mode Sense only. If this bit is 0 then MIC has not been detected in the cassette.
WORM: If this bit is 1, then WORM cassette is detected.
WC (WORM CAPABLE): If this bit is 0, then this drive does not support WORM cassette. If this bit is 1, then this
drive support WORM cassette.