Filter
Top Products
6.Command Specification REQUEST SENSE
SONY AIT-5 drive SDX-1100V series Ver.1.0
6-90
55 04
INSUFFICIENT REGISTRATION RESOURCES (attempt to register more than 1 key)
83 02
No MIC Detected
83 04
MIC out of Memory
83 05
No Data Body Detected in the MIC
83 0C
MIC format type is undefined
83 0D
MIC capacity field indicates illegal value.
83 80
Partition Count exceeded
83 89
User Volume Note Size Mismatch
83 8A
User Partition Note Size Mismatch
83 97
Current Partition is not the last partition
83 98
Can not append the new partition, because remaining capacity too short.
83 99
Can not delete partition
83 9B
Can not format tape because real tape capacity is exceeded
05h
83 9C
Can not append new partitions because the MIC is out of memory
UNIT ATTENTION. Indicates that the removable medium may have been changed or
the target has been reset.
28 00
NOT READY TO READY TRANSITION, MEDIUM MAY HAVE CHANGED
29 00
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
29 80
Drive Failed Power-on test or Diagnostic - (SONY Unique)
2A 01
MODE PARAMETERS CHANGED - Issued to all other initiators after one initiator
changes any Mode Parameter.
2A 03
RESERVATION PREEMPTED (after removing reservation by the CLEAR action)
2A 05
REGISTRATION PREEMPTED (after removing reservation by the PREEMPT or
PREEMPT ABORT action)
3F 11
MEDIUM AUXILIARY MEMORY ACCESIBLE
06h
83 87
Broken MIC is loaded in AIT mode
DATA PROTECT. Indicates that a WRITE type of operation was attempted on a write
protected tape, write operation is not performed.
27 00
WRITE PROTECTED – Cassette is Write Protected.
07h
83 0B
BROKEN MIC – Cassette is Write Protected
BLANK CHECK. Indicates the drive encountered blank medium or end-of-data
indication while reading.
00 00
NO ADDITIONAL SENSE INFORMATION - Blank Tape was encountered at BOT
08h
00 05
END-OF-DATA DETECTED - During READ or SPACE command.
Vendor Specific
83 08
MIC is not formatted yet
83 0B
MIC is broken
09h
83 83
MIC exists but is not used