Filter
Top Products
4.Operation
SONY AIT-5 drive SDX-1100V series Ver.1.0 4-1
4. Operation
4.1. Summary of LED Indications
The drive has 3 LEDs. Each LED shows "Tape Motion", "Cleaning Request", and "Replace Tape" as defined.
"Tape Motion" means to show the tape motion in the drive.
"Cleaning Request" to be on means that CLEANING is required.
"Replace Tape" to be on means that the tape needs to be replaced. It should be on when a medium error
occurred.
All of the three LEDs flash fast simultaneously when the drive is in malfunction.
The
following table shows the meaning of each LED indications:
Table 4-1: Meaning of each LED indications
LED Tape Motion Cleaning Request Replace Tape
Off No Tape Cleaning is Not Necessary No Media Error Occurred
On Tape Loaded Cleaning Request Media Error Occurred
Flash Slowly Tape Access in Progress
(Write/Read)
Cleaning is Not Completed
Flash Fast Tape Access in Progress
(Others)
All LED Flash Fast H/w Error Occurred
Flash Fast (0.3sec on/ 0.3sec off)
0.3 sec
Flash Slowly (0.9sec on/ 0.3sec off)
0.9sec 0.3sec