Filter
Top Products
Step 2: Connecting the Projector
Connections and
Preparations
13
GB
Side view
Step 2:
Connecting the
Projector
When making connections, be sure to do the
following:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; plugs that are not
fully inserted often generate noise. When pulling
out a cable, be sure to pull it out from the plug, not
the cable itself.
• Refer to the operating instructions of the connected
equipment.
• When you connect your projector to PJ MULTI or
DVI connector, select the input signal with the
“Input-A Signal Sel.” or “DVI Signal Sel.” setting in
the SET SETTING menu. (1 page 34)
Note
Before you change the “DVI Signal Sel.” setting, disconnect the
DVI cable and turn off the digital tuner, etc.
------------------------------------------------------------------------------
• HDMI, HDMI logo and High-Definition Multimedia Interface
are trademaarks or registered trademarks of HDMI Licensing
LLC.
134.2 (5
3
/
8
)
368.5 (14
5
/
8
)
216.6 (8
5
/
8
)
62.1
(2
1
/
2
)
61.5
(2
1
/
2
)
217.2 (8
5
/
8
)
234.3 (9
1
/
4
)
Front of the cabinet
Center of the lens
Unit: mm (inches)