Filter
Top Products
15
GB
Printing from a PC (PC mode)
Printing from a PC (PC mode)
To print from a PC connected to the
printer, you need to install the supplied
software to your PC.
This section explains how to install the
supplied software on your PC and how
to use the supplied PictureGear Studio
software to print an image.
Please also refer to the operating
instructions of your PC.
On trademarks and copyrights of
PictureGear Studio
• On copyrights of design materials
The copyrights of the design materials
contained in this software are owned by
Sony Corporation or Sony Music
Communications Corporation. Any
commercial use is prohibited by the
copyrights laws.
• Duplication of copyrighted materials, such
as photographs, is prohibited except for
private or domestic use.
• All other companies and product names
mentioned herein may be the trademarks
or registered trademarks of their respective
companies. Furthermore, “™” and “
®
” are
not mentioned in each case in this manual.
Installing the
software
System requirements
To use the supplied printer driver and
PictureGear Studio, your PC must meet
the following system requirements:
OS: Microsoft Windows
®
XP
Professional/Windows
®
XP Home
Edition/Windows
®
2000
Professional/Windows
®
Millennium Edition/Windows
®
98
Second Edition, pre-installed (IBM
PC/AT compatible)
(Windows
95, Windows
98 Gold
Edition, Windows NT, other
versions (ex. Server, Personal) of
Windows 2000 are not supported.)
CPU: Pentium III 500MHz or faster
(Pentium III 800MHz or faster is
recommended.)
RAM: 128 MB or more (256 MB or more
is recommended.)
Hard disk space: 200 MB or more
(Depending on the Windows
version you use, more space will be
required. To handle image data,
you will need additional hard disk
space.)
Display:
Screen area: 800 x 600 pixels or more
Colors: High Color (16-bit) or more
Continued