Filter
Top Products
11Location and Function of Controls
Overview
Location and
Function of Controls
1 Control panel
For details, see “Control Panel” on
page 12.
2 Lens protector (lens cover)
The lens protector automatically opens
when the power is turned on.
3 Ventilation holes (exhaust)
4 Remote control detector
5 Adjuster (hind pad)
Turn the adjuster to the right or left for
minor tilt adjustment of the projected
picture.
6 Ventilation holes (intake)/Lamp
cover
7 Ventilation holes (intake)/air
filter cover
• Do not place anything near the
ventilation holes as it may cause
internal heat build-up.
• Do not place your hand or objects
near the ventilation holes as it may
cause the air coming out heat build-
up.
• To maintain optimal performance, clean
the air filter every 500 hours.
For details, see “Cleaning the Air
Filter” on page 42.
8 Ventilation holes (intake)
9 Powered tilt adjuster
0 Indicators
POWER SAVING
Lights up when the projector is in power
saving mode.
TEMP (Temperature)/FAN
Lights up or flashes under the following
conditions:
– Lights up when temperature inside the
projector becomes unusually high.
– Flashes when the fan is broken.
LAMP/COVER
Lights up or flashes under the following
conditions:
– Lights up when the lamp has reached
the end of its life or becomes a high
temperature.
– Flashes when the lamp cover is not
secured firmly.
For details, see pages 34, 45.
qa Focus ring
Adjusts the picture focus.
qs Zoom ring
Adjusts the picture size.
Top/Front/Left Side
Rear/Right Side/Bottom
5
4
6
7
8
9
qa
0
qs
qd
qf
qg
Notes