Filter
Top Products
41Replacing the Lamp
Maintenance
5 Insert the new lamp all the way in until
it is securely in place (1). Tighten the
two screws (2). Fold the handle (3).
• Be careful not to touch the glass surface
of the lamp.
• The power will not turn on if the lamp is
not secured properly.
6 Close the lamp cover and tighten the
screws.
7 Turn the projector back over.
8 Connect the power cord. The ON/
STANDBY indicator around the
I/1
key lights in red.
9 Press the following keys on the remote
commander in the following order for
less than five seconds each: RESET,
b, B, ENTER.
Do not put your hands into the lamp
replacement spot, or not fall any liquid or
object into it to avoid electrical shock or fire
Disposal of the used lamp
For the customers in the USA
This product contains mercury. Disposal of
this product may be regulated if sold in the
United States. For disposal or recycling
information, please contact your local
authorities or Electronics Industries Alliance
(http://www.eiae.org).
Notes
Note