Filter
Top Products
24 Security Lock
Security Lock
The projector is equipped with a security
lock function. When you turn the power of
the projector on, you are required to input
the previously set password. If you do not
input the correct password, you will not be
able to project the picture.
You will not be able to use the projector if you
forget your password and the password
administrator is not available. Be please aware
that using the security lock can prevent valid
usage in such cases.
To use the security lock
1 Press the MENU key and then, in the
INSTALL SETTING menu, turn on
the
“Security Lock” setting.
2 Enter the password.
Use the MENU, v/V/b/B, and ENTER
keys to enter the four-digit password.
(The default setting is “ENTER,
ENTER, ENTER, ENTER.” Input
“ENTER” four times when you use the
projector for the first time.)
Next, the screen for entering a new
password is displayed. (Enter the current
password at this screen if you want to
keep it.)
3 Enter the password again to confirm.
The security lock is completed when the
following message appears.
If the menu screen displays an “Invalid
Password!” message, do over again from
step 1.
4 Turn the main power off and
disconnect the AC power cord.
The security lock is set to on, then it
becomes effective. The screen for
entering the password is displayed when
the power is turned on the next time.
Security certification
When the screen for entering the password is
displayed, enter the password that was set. If
you fail to enter the correct password after
three tries, the projector cannot be used. In
this case, press the I / 1 key to turn off the
power.
Note
Enter password key.
Password required for power-on.
Use: Cancel: Other key
Enter new password key.
Power-on cannot be performed
without the password.
Use: Cancel: Other key
Re-enter new password key.
Be sure to remember this password.
Use: Cancel: Other key
Tilt...
V Keystone: Auto...
Image Flip: Off
Background: Blue
Lamp Mode: Standard
High Altitude Mode
: Off
Security Lock: On
INSTALL SETTING
Input A
Security Lock enabled!
X
Tilt...
V Keystone: Auto...
Image Flip: Off
Background: Blue
Lamp Mode: Standard
High Altitude Mode
: Off
Security Lock: Off
INSTALL SETTING
Input A
Invalid Password!
X