Filter
Top Products
12 Location and Function of Controls
qd Connector panel
For details, see “Connector Panel” on
page 13.
qf Speaker
qg Security lock
Connects to an optional security cable
(Kensington’s).
Web page address:
http://www.kensington.com/
1 I / 1 (on/standby) key
Turns on the projector when the
projector is in standby mode. The ON/
STANDBY indicator around the I / 1
key lights in green when the power is
turned on.
2 ON/STANDBY indicator (located
around the
I / 1 key)
Lights up or flashes under the following
conditions:
– Lights in red when a AC power cord is
plugged into a wall outlet. Once in
standby mode, you can turn on the
projector with the I / 1 key.
– Lights in green when the power is
turned on.
– Flashes in green while the cooling fan
runs for about 90 seconds (VPL-ES2)/
for about 70 seconds (VPL-CS7) after
the power is turned off with the I / 1
key.
For details, see page 21.
3 INPUT key
4 TILT adjustment key
For details, see“Projecting” on
page 19.
5 MENU key
Displays the on-screen menu. Press
again to clear the menu.
6 ENTER key
Enters the settings of items in the menu
system.
7 Arrow keys (f/F/g/G)
Select the menu or to make various
adjustments.
Control Panel
INPUT MENU
PUSH
ENTER
TILT
132456
7