Sony VPL-CS7 Projector User Manual


 
49Specifications
Others
VD:
Vertical sync input: 1-5 Vp-p
high impedance, positive/
negative
Y P
B/CB PR/CR (VPL-ES2 only)
Component phono plug
sync/Y: 1 Vp-p ± 2 dB sync
negative (75 ohms terminated)
C
B/PB: 0.7 Vp-p ± 2 dB (75 ohms
terminated)
C
R/PR: 0.7 Vp-p ± 2 dB (75 ohms
terminated)
AUDIO Stereo minijack
500 mVrms, impedance more
than 47 kilohms
OUTPUT MONITOR OUT (VPL-CS7
only): HD D-sub 15-pin
(female)
R, G, B: Gain Unity: 75 ohms
SYNC/HD, VD: 4 Vp-p (open),
1 Vp-p (75 ohms)
Safety regulations
UL60950, cUL (CSA No. 60950),
FCC Class B, IC Class B,
NEMKO (EN60950), CE
(LVD, EMC), C-Tick
General
Dimensions 295 × 78 × 238 mm (11
5
/8 ×
3
1
/8 × 9
3
/8 inches) (w/h/d)
(without the projection parts)
Mass VPL-CS7: Approx. 2.9 kg (6 lb 6
oz)
VPL-ES2: Approx. 2.8 kg (6 lb 3
oz)
Power requirements
AC 100 to 240 V, 50/60 Hz
Power consumption
VPL-CS7: Max. 250 W
VPL-ES2: Max. 220 W
(Standby mode: 4.6 W)
Heat dissipation
VPL-CS7: 853.1 BTU
VPL-ES2: 750.7 BTU
Operating temperature
0°C to 35°C (32°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to 140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander (1)
Lithium battery CR2025 (1)
HD D-sub 15 pin cable (2 m) (1)
(1-791-992-21)
Soft case (1)
AC power cord (1)
Air filter (for replacement) (1)
Operating Instructions (CD-ROM)
(1)
Quick Reference Manual (1)
Security Label (1)
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp
(for replacement)
LMP-E180 (for VPL-CS7 only)
LMP-E150 (for VPL-ES2 only)
Signal Cable SMF-402 (HD D-sub 15-pin
(male) y 3 × phono type
(male))
Pin assignment
INPUT A connector (HD D-sub 15-pin,
female)
1R/R-Y 9N.C.
2 G/Y 10 GND
3 B/B-Y 11 GND
4 GND 12 DDC/SDA
5 GND 13 HD/C.Sync
6 GND (R) 14 VD
7 GND (G) 15 DDC/SCL
8 GND (B)