Sony VPL-CX63 Projector User Manual


 
F:\Nouhin_NAGANO_E\0403N_VPL-
CX63_OM_CDROM\0403N_2684389111VPLCX63GB_OM\02C01.fm
masterpage: Right
11
Location and Function of Controls
Overview
VPL-CX63/CX61
2-684-389-11 (1)
The fan runs for about 60 seconds after
the power is turned off.
For details, see page 19.
c INPUT key
d MENU key
Displays the on-screen menu. Press
again to clear the menu.
e ENTER/f/F/g/G (Arrow) keys
Used to enter the settings of items in the
menu system, select a menu, or make
various adjustments.
f FOCUS +/– keys
Adjusts the picture focus.
g ZOOM +/– keys
Adjusts the picture size.
h PICTURE MUTING key
Cut off the picture. Press again to restore
the picture.
i Status indicators
•POWER SAVING
Lights when the projector is in power
saving mode.
TEMP (Temperature)/FAN
Lights or flashes under the following
conditions:
Lights when the temperature inside
the projector becomes unusually
high.
Flashes when the fan is broken.
LAMP/COVER
Lights or flashes under the following
conditions:
Lights when the lamp has reached
the end of its life or reaches a high
temperature.
Flashes when the lamp cover or air
filter cover is not secured firmly.
For details on the TEMP/FAN and
LAMP/COVER indicators, see page 41.
a INPUT A connector (HD D-sub
15-pin, female)
Inputs a computer signal, video GBR
signal, component signal, or DTV signal
depending on the connected equipment.
Connects to the output connector of
equipment using the supplied cable or an
optional cable.
For details, see “Connecting a
Computer” on page 15 and
“Connecting a VCR” on page 16.
b AC IN socket
Connects the supplied AC power cord.
Connector Panel
Open the cover when using the INPUT B or
VIDEO IN connector. To open the cover, push
the cover and slide it toward the right until it
locks.
To close the cover, press the cover to unlock
it and slide the cover toward the left.