Sony VPL-CX63 Projector User Manual


 
F:\Nouhin_NAGANO_E\0403N_VPL-
CX63_OM_CDROM\0403N_2684389111VPLCX63GB_OM\07ADD.fm
masterpage: Left
48
Specifications
VPL-CX63/CX61
2-684-389-11 (1)
When a signal other than the preset signals shown above is input, the picture may not be displayed
properly.
Memory No. 22
*1
and 34
*1
show the interlace signal.
For the Memory No. 38
*2
, the smart APA function and the APA key of the remote commander do
not activate. Make adjustments for the input signals using the Adjust Signal... on the INPUT
SETTING menu.
When an SXGA+ signal is input, the image may extend beyond the edges of the screen. In this
case, input a signal with no black edges around the image, and disconnect and reconnect the cable
or select the input signal by pressing the INPUT key.
32 1280 × 960 SXGA VESA 60 Hz 60.000 60.000 H-pos, V-pos 1800
33 SXGA VESA 75 Hz 75.000 75.000 H-pos, V-pos 1728
34
*1
1280 × 1024 SXGA VESA 43 Hz 46.433 86.872 H-pos, V-pos 1696
35 SGI-5 53.316 50.062 S on G 1680
36 SXGA VESA 60 Hz 63.974 60.013 H-pos, V-pos 1696
37 SXGA VESA 75 Hz 79.976 75.025 H-pos, V-pos 1688
38
*2
SXGA VESA 85 Hz 91.146 85.024 H-pos, V-pos 1476
43 480/60p 480/60p
(Progressive
component
31.470 60.000 S on G/Y
44 575/50p 575/50p
(Progressive
component
31.250 50.000 S on G/Y
45 1080/50i 1080/50i 28.130 50.000 S on G/Y
47 720/60p 720/60p 45.000 60.000 S on G/Y
48 720/50p 720/50p 37.500 50.000 S on G/Y
50 540/60p 540/60p 33.750 60.000 S on G/Y
52 1400 × 1050 SXGA+ 60 Hz 63.981 60.020 H-pos, V-pos 1688
Memory
No.
Preset signal fH (kHz) fV (Hz) Sync SIZE
Notes