Filter
Top Products
F:\Nouhin_NAGANO_E\0403N_VPL-
CX63_OM_CDROM\0403N_2684389111VPLCX63GB_OM\05C04.fm
masterpage: Left
32
The INSTALL SETTING Menu
VPL-CX63/CX61
2-684-389-11 (1)
The INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
Setting items Functions Initial setting
V Keystone Corrects the trapezoidal distortion caused by the projection
angle. Select “Auto” for automatic correction, or
“Manual” for manual correction using the v/V/b/B keys
on the Remote Commander.
When the bottom of the trapezoid is longer than the top
: Sets a lower value.
When the top of the trapezoid is longer than the bottom
: Sets a higher value.
Auto
Image Flip Flips the image on the screen horizontally and/or vertically.
• Off: The image does not flip.
• HV: Flips the image horizontally and vertically.
• H: Flips the image horizontally.
• V: Flips the image vertically.
Off
Background Selects the background color of the screen when no signal
is input to the projector. Select “Black” or “Blue.”
Normally, set to “Blue.”
Blue
Test Pattern When set to “On,” a test pattern is displayed on the screen
during “Lens Zoom” adjustment, “Lens Focus,” or “V
Keystone.”
Off
Lamp Mode Sets the lamp brightness used during the projection.
• High: Illuminates the projected image brightly.
• Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the “High” setting.
Standard
Lens Control When set to “Off,” the LENS (FOCUS, ZOOM) key on the
Remote Commander, and the FOCUS and ZOOM keys on
the projector do not function.
On
Direct Power On Set to “On” if you are using a circuit breaker to turn the
power on/off the entire system. You can turn off the power
just by unplugging the power cord without pressing the ?/1
key.
Off
High Altitude
Mode
Set to “On” when the projector is used at an altitude of
1,500 m or higher.
Off