Filter
Top Products
F:\Nouhin_NAGANO_E\0403N_VPL-
CX63_OM_CDROM\0403N_2684389111VPLCX63GB_OM\05C04.fm
masterpage: Right
29
The SET SETTING Menu
Adjustments and Settings Using a Menu
VPL-CX63/CX61
2-684-389-11 (1)
The SET SETTING Menu
The SET SETTING menu is used for changing the settings of the projector.
Setting items Functions Initial setting
Smart APA The APA (Auto Pixel Alignment) automatically
adjusts “Dot Phase,” “H Size” and “Shift” on the
INPUT SETTING menu for the input signal from a
computer.
• On: When a signal is input from a computer, the
APA functions automatically so that the picture can
be seen clearly. Once the specified input signal has
been adjusted by the “Smart APA,” it will not be
readjusted even when the cable is disconnected and
connected again or the input channel is changed. You
can adjust the picture by pressing the APA key on the
Remote Commander even if “Smart APA” set to
“On.”
• Off: The APA functions when you press the APA key
on the Remote Commander.
On
Auto Input Search When set to “On,” the projector detects input signals in
the following order: Input-A/Input-B/Video/S-Video.
It indicates the input channel when the power is turned
on or the INPUT key is pressed.
Off
Input-A Signal Sel. Selects the “Computer,” “Component,” or “Video
GBR” signal input via the INPUT A connector.
Computer
Color System Selects the color system of the input signal.
If you select “Auto,” the projector detects the color
system of the input signal automatically. If the picture
is distorted or colorless, select the color system
according to the input signal.
When the color system of the input signal is PAL60,
select “PAL.” If “Auto” is selected, the color system
cannot be detected.
Auto
Speaker Set to “Off” to cut off the sound of the internal
speakers. When set to “Off,” “Speaker:Off” appears on
the screen when you turn on the power.
On