Filter
Top Products
Analog Mode
Adjustments and Settings Using the Menu
17
INIT To return
(initialize) all
menu items to
their factory
defaults.
[INI:OK]: Returns all
settings to their factory
defaults.
BACK: Cancels
initialization and returns to
the item selection column.
INTRT To select
operation
performed when
printing of the
current image is
interrupted.
In single picture mode
IN:ON: Stops printing
when the PRINT button is
pressed during printing and
starts printing the image
captured at the instant you
pressed the PRINT button.
[IN:OFF]: Printing does not
stop even if the PRINT
button is pressed during
printing. When printing of
the current image ends, the
unit prints the image
captured at the instant you
pressed the PRINT button.
In multi-picture mode
IN:ON: Stops printing
when the CAPTURE button
is pressed during printing.
The image captured at the
instant you pressed the
CAPTURE button is
inserted at the location
indicated by flashing.
[IN:OFF]: Disables the
interruption of printing or
image capture, even if the
CAPTURE button is
pressed during printing.
BACK: Cancels the setting
change and returns to the
item selection column.
LOAD To load the
registered settings
LO:3: Loads the “SA:3”
settings registered using the
“SAVE” menu item.
LO:2: Loads the “SA:2”
settings registered using the
“SAVE” menu item.
[LO:1]: Loads the “SA:1”
settings registered using the
“SAVE” menu item
BACK: Cancels the setting
change and returns to the
item selection column.
MEDIA To select the type
of paper
ME:HG: Uses UPP-210SE.
[ME: HD]: Uses UPP-
210HD.
ME:BL: Uses UPT-210BL.
However, the UP-970AD
model cannot use UPT-
210BL.
BACK: Cancels the setting
change and returns to the
item selection column.
Item Function Settings
MEMRY To select the
memory mode
ME:FLD: When printing
fast-moving images (such
as a ball being thrown), the
printout may be blue. If this
happens, select this setting.
[ME:FRM]: Normally select
this setting.
BACK: Cancels the setting
change and returns to the
item selection column.
MENU To print the menu
settings currently
selected
[ME:OK]: Prints the menu
list currently set.
BACK: Cancels printing
and goes back to its item
column.
MIROR To print mirror
images.
MI:ON: Prints mirror
images.
[MI:OFF]: Prints normal
images not mirror images.
BACK: Cancels the setting
change and returns to the
item selection column.
MULTI To specify the
number of images
to be printed on
one sheet of the
printout
MU:6: Prints six images on
one sheet of the printout
(six reduced images).
MU:4: Prints four images
on one sheet of the printout
(four reduced images).
MU:2: Prints two images
on one sheet of the printout
(two reduced images).
[MU:1]: Prints one full-size
image.
BACK: Cancels the setting
change and returns to the
item selection column.
PAGE
(These menu
settings are
not available
when “MU:2”
to “MU:6” is
selected in
“MULTI”.)
Each time you
press the PRINT
button, the image
is stored in
memory. Up to 6
images can be
stored.
You can select the
desired image
from 6 kinds of
images stored in
memory and
make a printout.
[PG:1] to PG:6: Prints by
selecting the desired ONE
image from among images
1 to 6 and pressing the
COPY button.
BACK: Cancels the setting
change and returns to the
item selection column.
A.PRNT To turn on and off
automatic
printing in multi-
picture mode.
A.P:ON: Automatically
prints when all the images
of the selected multi-picture
mode are captured without
the need to press the COPY
button.
[A.P:OFF]: Prints images
when the COPY button is
pressed.
BACK: Cancels the setting
change and returns to the
item selection column.
Item Function Settings