Filter
Top Products
Analog Mode
Printing
24
Making Copies of the Last Printout
Press the COPY button. The unit makes a copy of the
last printout. Each press of the COPY button prints the
number of images set in the “QTY” menu.
Note
If you press the COPY button immediately after turning
the power on, the alarm buzzer will sound as nothing is
stored in memory.
To make multiple copies of the same printout
Press the COPY button as many times as necessary
while copying the first printout. With each press of the
COPY button, a buzzer sounds and the number of
images set in the “QTY” menu is printed.
To interrupt copying
To cancel a print job in progress, press the OPEN/
CLOSE button, FEED button or CUT button.
To make copies in different directions
You can copy the image stored last in a different
direction. Before pressing the COPY button, select the
printing direction.
To print from a remote location
If a Remote Control Unit RM-91 is connected to the
REMOTE connector on the rear panel, you can make
printing start at a short distance from the unit by pressing
the remote switch.
Single-picture mode
When an image you want to print appears, press the
remote switch.
A screenshot of that instant is printed and saved in
memory. Up to six screenshots can be saved. Any new
screenshots beyond six will overwrite one of the
originally captured images.
Multi-picture mode
When an image you want to capture appears, press the
remote switch to save a screenshot of that instant in
memory.
Printing starts automatically when the number of images
set in the “MULTI” menu have been captured.
Note
Even if “IN:ON” is selected in the “INTRT” menu,
pressing the remote switch performs the same action as
pressing the PRINT button or CAPTURE button in each
mode.
Selecting the Printing Direction and
Size
Use the following menu items to select printing
direction and size.
• SIDE: Selects the printing direction of the image.
• SFT.H, SFT.V: Selects the horizontal or vertical
printing position.
• SIZE.H, SIZE.V (for the UP-990AD only):
Configures the width or height of the captured image.
• SCAN (for the UP-970AD only): Selects one of three
available size settings for the captured image.
Selecting the printing direction
You can select the printing direction using the “SIDE”
menu item.
To print in the same direction as the one
displayed on the video monitor
Select “S:STD” from “SIDE.”
To print the image rotated by 90 degree
counterclockwise
Select “S:SIDE” from “SIDE.”
Determining image size
(Model UP-990AD)
Change the value for the “SIZE.H” menu item to
configure the width settings of the captured image, and
change the value for the “SIZE.V” menu item to
configure the height settings.
(Model UP-970AD)
Use the “SCAN” menu item to select one of three size
settings for the captured image.
I
mage
di
sp
l
aye
d
on
th
e v
id
eo mon
it
or
Printouts
When “S:STD” is selected
When “S:SIDE” is selected