Filter
Top Products
Hardware Setup SY-6BA+ III
18
Step 9. Cooling Fan Installation
1. CPU Cooling Fan
After you have seated the CPU properly on the processor, attach the
3-pin fan cable to the CPUFAN connector on the Motherboard. The
fan will stop when the system enters into Suspend Mode. (Suspend
mode can be enabled from the BIOS Setup Utility, [POWER
MANAGEMENT] menu.)
To avoid damage to the system, install according to the following pin
assignment:
2. Chassis Cooling Fan & Power Cooling Fan
Some chassis also feature a cooling fan. This Motherboard features
a CHAFAN connector to provide 12V power to the chassis fan.
Connect the cable from the chassis fan to the CHAFAN 3-pin
connector. Install according to the following pin assignment:
Note: CPUFAN must be installed for this Motherboard,
CHAFAN and PWRFAN are optional.
CPU Cooling Fan
CPUFAN Pin Assignment
1
2
3
GND
12V
SENSOR
Chassis Cooling Fan
CHAFAN Pin Assignment
1 2 3
GND 12V SENSOR
Power Cooling Fan
PWRFAN Pin Assignmen
1
2
3
GND
12V
SENSOR