Filter
Top Products
Hardware Setup SY-6BA+ III
25
Step 2. Select [LOAD SETUP DEFAULT]
Select the “ LOAD SETUP DEFAULT” menu and type “ Y” at the
prompt to load the BIOS optimal setup.
Step 3. Select [SOYO COMBO SETUP]
Move the cursor to the [CPU Frequency] field to set the CPU
frequency.
(1) CPU Name & CPU ID
The BIOS will read the CPU name string and CPU ID code From the CPU and it
will display it here. This item provides information only and can not be change.
(2) CPU Frequency
Available [CPU Frequency] settings on your SY-6BA+ III
Motherboard are detailed in the following table.
CPU Frequency (MHz)
Manual 466MHz ( 66 x 3.5)
233MHz (66 x 3.5) 350MHz (100 x 3.5)
266MHz (66 x 4 ) 400MHz (100 x 4 )
300MHz (66 x 4.5) 450MHz (100 x 4.5)
333MHz (66 x 5 ) 500MHz (100 x 5 )
366MHz (66 x 5.5) 550MHz (100 x 5.5)
400MHz (66 x 6 ) 600MHz (100 x 6 )
433MHz (66 x 6.5) 650MHz (100 x 6.5)
Select the working frequency of
your Pentium
®
III, Pentium
®
II,
Celeron processor among
these preset values.
Note: Mark the checkbox
that corresponds to the working
frequency of your Pentium
®
III,
Pentium
®
II, Celeron
processor in case the CMOS
configuration should be lost.
If you set this field to [Manual], you are then required to fill in the
next two consecutive fields: (a) the CPU Host/PCI Clock, and (b) the
CPU Ratio.