Filter
Top Products
Hardware Installation SY-K7ADA
15
2-2 UNPACKING THE MOTHERBOARD
When unpacking the Motherboard, check for the following items:
u The SY-K7ADA ALi MAGIK1 AGP/PCI
Motherboard
u The Quick Start Guide
u The Installation CD-ROM
u SOYO Bonus Pack CD-ROM
u One IDE Device ATA33/66/100 Flat Cable
u One Floppy Disk Drive Flat Cable
u One Heat Sink Compound
Warning: Do not unpack the Motherboard from its anti-static
packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged by
electrostatic discharge. To avoid permanent damage to components ground
yourself while working by using a grounding strap. Otherwise, ground
yourself frequently by touching the unpainted portion of the computer
chassis to drain the static charges.
Handle the Motherboard carefully, hold it by the edges.
You are now ready to start the installation.