Filter
Top Products
BIOS Setup Utility SY-K7ADA
72
PNP/PCI Configuration Setup (Continued)
PNP/PCI
Setup
Setting Description Note
Your OS may reassign another interrupt to a PCI slot after BIOS passes control to
the OS, especially if you use Windows 95, 98 or NT.
Disabled Leave this field at Disabled. Default
PCI/VGA
Palette
Snoop
Enabled
Disabled BIOS will assign IRQ for
VGA/USB port.
Assign IRQ
For
VGA/USB
Enabled BIOS won’ t assign IRQ for
VGA/USB port.
Default
Edge
Level Default
PCI IRQ
Active By
This item allow you to
determine which win
ACTIVATE PCI IRQ.
3-6.2 MULTI I/O ADDRESSES
Default settings for multi-I/O addresses are as follows:
Port I/O Address IRQ Status
LPT1
378H 7 ECP/EPP
COM1
3F8H 4
COM2
2F8H 3
Warning: If a default I/O address conflicts with other I/O cards
such as sound card, you must change one of the I/O addresses to
remedy to this address conflict. (I/O addresses can be adjusted from
the BIOS Setup Utility)