Filter
Top Products
BIOS Setup Utility SY-K7ADA
65
IrDA Default
ASKIR
TFDS6000
The second serial port offers
these InfraRed interface
modes.
HSDL3600
HSDL1100
Hi, Hi
Hi, Lo Default
Lo, Hi
UART Mode
Select
RxD, TxD Active
Lo, Lo
This item allow you to
determine the active RxD,
TxD.
If [UART Mode Select] is set to [IrDA]/[ASKIR]
Half Default
IR Duplex Mode
Full
Choose [Half] or [Duplex] to
set UR2 in half duplex mode
or full duplex mode
respectively. Refer to your IR
device specifications to select
the suitable mode.
1 Default
Fast IR Mode
Use DMA
3
3-4.6 Onboard Parallel Ports
Onboard Parallel
Ports
Setting Description Note
Disabled
378/IRQ7 Default
3BC/IRQ7
Onboard Parallel
Port
278/IRQ5
Choose the printer I/O
address.
EPP 1.9
ECP
ECP+EPP1.9
SPP Default
EPP 1.7
Parallel Port Mode
ECP+EPP1.7
The mode depends on your
external device that
connects to this port.
If [Parallel Port Mode] is set to [ECP] mode
3 Choose DMA3 Default
ECP Mode use
DMA
1 Choose DMA1
If [Parallel Port Mode] is set to [EPP] mode