Filter
Top Products
BIOS Setup Utility SY-K7ADA
64
3-4.2 Keyboard Controls
Keyboard Controls Setting Description Note
PCI Slot
Init Display First
AGP
Choose which card – AGP
Display card or PCI VGA card –
to initialize first.
Default
3-4.3 IDE HDD Block Mode
Setting Description Note
Disabled
IDE HDD Block Mode
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function.
Default
3-4.4 FDD Controls
FDD Controls Setting Description Note
Disabled Turn off the on-board
floppy controller
Onboard FDC
controller
Enabled Use the on-board floppy
controller
Default
3-4.5 Onboard Serial Ports
Onboard Serial
Ports
Setting Description Note
Disabled Default
(port 3)
3F8/IRQ4 Default
(port 1)
2F8/IRQ3 Default
(port 2)
3E8/IRQ4
2E8/IRQ3
Onboard
Serial Port 1 /
Serial Port 2 /
Serial Port 3
Auto
Choose serial port 1 & 2's I/O
address.
Do not set port 1 & 2 to the
same address except for
Disabled or Auto.