Filter
Top Products
Hardware Installation SY-K7ADA
37
If you set ratio to manual and configure the RJ1 DIP Switch to the settings
that match your CPU speed, as follow table:
RJ1 1 2 3 4 RJ1 1 2 3 4
5 On On
Off
On 9 On On
Off Off
5.5
Off
On
Off
On 9.5
Off
On
Off Off
6 On
Off Off
On 10 On
Off Off Off
6.5
Off Off Off
On 10.5
Off Off Off Off
7 On On On
Off
11 On On On On
7.5
Off
On On
Off
11.5
Off
On On On
8 On
Off
On
Off
12 On
Off
On On
8.5
Off Off
On
Off
12.5
Off Off
On On
Note: SOYO does not guarantee system stability if the user over
clocks the system. Any malfunctions due to over-clocking are not
covered by the warranty.
2-3.4.2 Enable/Disable Power-On by Keyboard (JP1)
You may choose to enable the Power-On through Keyboard function by
shorting pin 2-3 on jumper JP1; or short pin 1-2 to disable this function.
Power-On by
Keyboard
Enable Disable
JP1 Setting
Short pin 2-3 to
enable the
Power-On by
Keyboard
function.
Short pin 1-2
and the Power-
On by Keyboard
function is
disabled.
Important: When using the Power-On by Keyboard function, please
make sure the ATX power supply is able to provide at least 720mA on
the 5V Standby lead (5VSB) in order to meet the standard ATX
specification.
12
3
123