Filter
Top Products
32 REFERENCE & INSTALLATION MANUAL
PART 8: REPORTING AND DIALER SETTINGS
The following section explains all the features and options that must be programmed in order for your security system to
properly report system events to a central station. When an event (e.g. zone in alarm) occurs in the system, the control panel
verifies if a report code was programmed in the section corresponding to the event (except Ademco Contact ID “All Codes”).
If a report code was programmed, the control panel will dial the central station telephone number defined by the Event Call
Direction feature. When the central station answers, the control panel will transmit the System Account Code, followed by the
programmed Report Code.
Figure 8.1: Event Reporting