Star Micronics DOT MATRIX PRINTERS Printer User Manual


 
2 Printer Setup
Unpacking the printer
Check to make sure that the carton contains each of the items shown in the
following illustration.
If anything is missing, contact the store where you bought the printer and ask
them to supply the missing part. Note that it is a good idea to keep the original
box and all the packing materials just in case you need to pack the printer up
again and send it somewhere at a later date.
A serial-to-parallel interface converter (SPC-8K), a serial interface unit (IS-
8H192 or IS-32H768), a pull tractor (PT-15HA), and an Automatic Sheet
Feeder (SF-15HA) are also available as options. Consult your dealer for details.
Important!
There are several versions of this printer designed for different voltages. It is
not possible to change the voltage of a printer. If the voltage shown on the label
on the bottom of your printer does not match the voltage for your area, contact
your dealer immediately.
Ribbon cassette
Platen knob
3.5"Floppy disk
Paper guide
Printer
User’s manual