Filter
Top Products
38 Paper Handling
❏ Insert a sheet of paper into the paper guide, with the side you want to print
on facing the back of the printer. Gently push the paper down into the
printer until you feel it stop.
❏ Pull the bail lever toward the front of the printer. This will feed the paper to
the starting position.
❏ After the paper is fully fed (indicated by the printer’s beeping), return the
bail lever back to its original position toward the back of the printer.
Important!
Never return the bail lever back to its original position until the paper is fully
fed. The printer will beep to let you know when you can return the bail lever to
its original position.
❏ If you want to move the paper to another position, use the micro feed
function described under “Micro feed” on page 20.
❏ Start the printing operation from your software application.
Clearing paper jams
Use the following procedure to clear paper jams from the printer.
❏ Turn the power off.
❏ Unplug the printer from its AC power outlet.
❏ Open the front cover of the printer.
❏ Carefully try to pull the jammed paper from the printer.
If necessary, change the release lever position or rotate the platen knob to
remove the paper.