Filter
Top Products
Troubleshooting guide 51
Printer does not feed paper
properly.
Jamming paper. Remove all paper from the
printer and then reload it.
The printer is not set up
correctly for the thickness of
paper being used.
Set up the printer for the
paper thickness you are
using. See “Adjusting for
paper thickness” on page 36.
Line spacing is incorrect. Jamming paper. Set up the printer for the
paper thickness you are
using. See “Adjusting for
paper thickness” on page 36.
The line spacing or leading
selected in your application
program is wrong.
Choose a different line
spacing or leading setting
from your application.
Auto line feed with carriage
return is enabled by the EDS
setting.
Use the EDS Mode to
disable auto line feed with
carriage return. See “Switch
4: Auto LF with CR” on
page 28.
Lines print over each other. Auto line feed with carriage
return is disabled by the EDS
setting.
Use the EDS Mode to enable
auto line feed with carriage
return. See “Switch 4: Auto
LF with CR” on page 28.
Jamming paper. Set up the printer for the
paper thickness you are
using. See “Adjusting for
paper thickness” on page 36.
Problem Possible Cause Recommended Action