Filter
Top Products
– 35 –
STAR MODE
Commands to Set the Page Format
FUNCTION
Set page length in lines
CODE <ESC> “C” n
HEX
1B 43 n
REMARKS
Sets the page length using the current line spacing, where n is
between 1 and 127.
Changing the line spacing later does not alter the physical page
length.
The current line becomes the top of the page.
Resets the bottom margin.
Default page length is 42 lines.
FUNCTION
Set page length in inches
CODE <ESC> “C” <0> n
HEX
1B 43 00 n
REMARKS
Sets the page length to n × 24 mm, where n is between 1 and 22.
The current line becomes the top of the page.
Resets the bottom margin.
FUNCTION
Set bottom margin
CODE <ESC> “N” n
HEX
1B 4E n
REMARKS
Sets the bottom margin to n lines at the current line spacing, where
n is between 0 and 127.
Bottom margin is reset when you change the page length.
Setting is invalid if the printing area on one page is 36 mm or less.
FUNCTION
Cancel bottom margin
CODE <ESC> “O”
HEX
1B 4F
REMARKS
Cancels the bottom margin.