Filter
Top Products
– 54 –
STAR MODE
Parameter
n4
Setting
FF command
4
Paper Feed,
Cut & Back
Star ESC/POS
–
(Default)
0
Form Feed
: Available
FUNCTION
Set memory switch
CODE
<ESC> “# N , n1n2n3n4” <LF> <NUL>
HEX
1B 23 N 2C n1n2n3n4 0A 00
REMARKS
Set the memory switch. In order to enable changed memory switch
setting, turn the printer OFF and ON again or send printer reset
command (<ESC> “?”) to the printer. Changed memory switch
settings are stored in EEPROM and these setting will be stored as
long as the time when they are changed again.
N :Memory switch number (0, 1, 2, 3, 4)
n1n2n3n4 :Mode settings (For details see below)
1) N=0
n1 :Always “0”
n2 :Always “0”
n3 :Always “0”
2) N=1
n1 :Always “0”
n2 :Always “0”
Parameter
n3
n4
Setting
Zero style
International character
set
1
Slashed zero
See below
ESC/POS
–
–
Star
(Default)
0
Normal zero
: Available
n4 Country
0 USA
1 France
2 Germany
n4 Country
3UK
4 Denmark #1
5 Sweden
n4 Country
6 Italy
7 Spain #1
8 Japan
n4 Country
9 Norway
A Denmark #2
B Spain #2
n4 Country
C Latin America