Filter
Top Products
7 Now press the @5SE3 button. The paper bail will move clear of the paper,
and the paper will be fed and adjusted past the print head to a position
ready for printing. The paper bail will be moved back to grip the paper
against the platen, and the print head will move to the start position. As
when loading cut-sheet paper, the Memory Switch setting will determine
the initial position of the paper after auto-feeding, and the micro feed
function may be used to adjust the paper position.
8 Remount the top cover rear cover and the transparent printer cover.
9 Remount the paper guide as shown below:
Once the paper has been loaded
The printer will now be on-line (the ON LINE indicator will be lighted). You
may now want to choose a font, a pitch and a print quality. This can be done
from the front panel, but you must put the printer off-line first by pressing
the (IEEE2 button. The indicator will go out and the printer will beep to
confirm this.
10