Filter
Top Products
In addition to these indicators, there are two others, POWER and PAPER. The
POWER indicator will illuminate when power is supplied to the printer, and
the PAPER indicator will illuminate when no paper has been inserted.
PITCH SETTING
Use the (PIT% button to set the pitch that will be printed. Remember that the
printer must be off-line for you to do this. Successive presses of this button
will illuminate (and select) the following options in this order:
Pitch
Indicator(s)
10 charactexx per inch
locP1
12 characters per inch
12CPI
17 characters per inch
locP1, COND
20 characters per inch
12CP1, COND
Proportional
PROP
Holding down this button will cycle continuously between these options.
,
Pitch Pane/ Lock
I
If the plyEn> button is pressed when the printer is turned on, the pitch will
be “locked”, and no pitch changes can be made from software. It is still
possible, however, to put the printer off-line and change the pitch using the
1
KCZ button.