Filter
Top Products
L
L
! L
! .
Set/cancel automatic line feed
cEsc>
5
CID
1Bh 35h
Cn>
27 53
Cn>
IBM
The command above sets or cancels automatic line feed, where <n> is a binary value
of either OOh or Olh. If <n>=Olh, then whenever the printer receives a <CR> (ODh),
a line feed will automatically be added by the printer. If cn>=OOh, then this function
will be cancelled.
Move to next horizontal tab
<Hn
09h
9
Both
The command above moves the print head to the next horizontal tab setting. There
are no parameters. If there are no horizontal tabs set on the line following the current
print position, this command is ignored. If underlining is on, then slopped print
positions are not underlined.
1 Set/clear horizontal tabs
Both 1
<ES6
D
1Bh
44h
27 67
. . .
. . .
. . .
Cd> <NULB
d>
OOh
Cd> 0
The command above sets horizontal tabs, where <nQ, and cd> are binary values
representing the new tab positions. If no values are given, all tab stops are cleared.
The default tab setting is every eight characters. Tabs are set at the current character
pitch. If proportional spacing has been selected, then pica pitch is used for
determining the positions of the tabs. In Standard mode, once the tabs have been set,
the position of the tabs will remain the same if the character pitch is changed. In the
IBM mode, the tab settings will change relative to the new character pitch if the
character pitch is changed.
45