Filter
Top Products
values (low byte first) giving the number of graphics data bytes following (as
represented by cd& . . .
<dn>). The number of data byte is twice the number of
graphics columns to be printed.
Miscellaneous codes
The following commands do not relate specifically to graphics, but have more
general applications:
1 Set MSB to 1
<ESC>
>
1Bh 3Eh
27 62
Both 1
The command above sets the MSB to 1. There are no parameters. On receipt of this
command, the most significant bit (MSB) of subsequent data will always be set to
1.
Set MSB to 0
<ES0
=
Standard
1Bh 3Dh
27 61
<FS>
=
IBM
1Ch 3Dh
28 61
The command above sets the MSB to 0. There are no parameters. On receipt of this
command, the most significant bit (MSB) of subsequent data will always be set
to 0.
55