Filter
Top Products
Process Engine Alarms Window
208 iPlanet Integration Server • Process System Guide • August 2001
You can add additional expressions to build complex filters. For example, the
following expressions displays alarms of type EngineUnitShutdownAlarm for
the engine named ceengine:
Type="EngineUnitShutdownAlarm"
Engine="ceengine"
For more information on creating filter expressions, refer to “Filtering iIS
Console Lists” on page 73.
➤ To search for an alarm in the Process Engine Alarms window
1. Choose Alarms > Find.
The Filter Expression window opens.
2. In the Filter Expression window, build an expression for the alarms you are
trying to find.
Use the steps outlined in the previous procedure to build the expression.
3. Click OK.
4. To search again, using the same expression, choose Alarms > Find Again.
Viewing Alarms
After an engine has been registered with the Alarm service, any alarms sent by that
engine (either in start-up or while it is running) are displayed in the Process Engine
Alarms window. The Process Engine Alarms window must be open. Alarms that
occur when the Process Engine Alarms window is not open, cannot be displayed
by opening the window. To see the alarm in that case, you have to open the engine
unit log file (see “Engine Log Files” on page 210).