Sun Microsystems 96257 Computer Drive User Manual


 
C-94 Sun Confidential: Internal Only 96257
Revision A
mean time between failures (MTBF). A figure that
gives an estimate of equipment reliability. The higher the
MTBF, the longer a piece of equipment should last. For
example, if MTBF is 10,000 hours, the equipment should
run, on average, for 10,000 hours before failing.
mean time to repair (MTTR). Average time from the be-
ginning of troubleshooting activities (when a CSE starts
work on a unit) until a subsystem (or part of it) is returned
to full functionality and total customer control. Includes
time used to verify fixes, but not logistics delays.
media acceptance test (MAT) partition. In VSM, a
holding partition that contains VTSS disk array drives
that can be assigned to the spares partition. Contrast
with production partition
, spares partition, unavailable
partition.
megahertz (MHz). Mega Hertz. A unit of frequency
equal to one million (1,000,000 or 10
6
) Hertz, used to
measure the clock speed of a computer processor.
migration. Movement of data from a VTSS to a RTD
where VTVs are stacked onto MVCs. Migration is initiat-
ed by VSM when high AMT levels are reached. VTVs are
selected for migration based on use and size, i.e. the
least-recently used and largest VTVs are selected first.
VSM provides ability to migrate VTVs on demand and to
migrate multiple copies of a VTV.
MIM. Machine-initiated maintenance. A machine-detect-
ed error or condition that initiates a call-home sequence
from the supported machine to the associated support
center host. Error event and log data is available to the
support representative for analysis. See also Service De-
livery Platform, ServiceTek Plus.
MLC. Machine-Level Control.
modem. A modulator-demodulator, or device that allows
a computer to receive and transmit data over standard
telephone lines. A modem takes digital data and con-
verts it to analog data, and the modem at the other end
takes analog data and converts it back to digital.
motherboard. The main circuit board inside a computer,
which contains a central processing unit, bus, memory
sockets, expansion slots, and other components.
MPSD. MultiPath Storage Director. A logical entity that
interfaces host computer channels to a disk device. In
VTSS, the MPSD has two storage paths (control re-
gions) capable of concurrent operation; both respond to
the same channel addresses.
MRF. Machine-readable FRU. A FRU that contains a
256-bit (or greater) serial EEPROM that allows the FRU
to be recognized and identified by the support facility.
MTBF. See Mean Time Between Failures
.
MTTR. See Mean Time To Repair
.
MVC. Multi-volume cartridge. A physical cartridge in a
LSM that contains one or more VTVs (or none), but has
been identified as a volume that can be selected for VTV
stacking. This data is stored in the CDS.
MVS. Multiple Virtual Storage. The most commonly-used
operating system for IBM mainframes; another common
operating system is VM.
N
N-Port. Node port. In Fibre Channel, a hardware con-
nection port in a point-to-point connection topology. An
F-Port provides a physical connection point for an N-
Port. See also F-Port.
NA. Not available.
N/A. Not applicable.
NAS. Network-attached storage.
NCKD device. A subsystem in which both virtual and re-
al devices are native count-key data type.
NCKD. Native count-key data.
NCL. See net capacity load
.
NCS. Nearline Control Solution.
Nearlink. In VSM, microcode used to give a CIP a ‘chan-
nel’ personality as opposed to a control unit personality
so that the CIP port can be used to drive an RTD or clink.
See real tape drive
, clink.
net capacity load (NCL). The amount of physical back-
end disk array storage space used by a VTSS to store
the defined functional capacity.
NiCad. Nickel-cadmium; a type of compact long-life bat-
tery used in various applications.
node. In a data network, a point where one or more func-
tional units interconnect data transmission lines.
Non-Disruptive Code Load (NDCL). A VTSS feature
that allows microcode changes to be implemented with-
out interrupting subsystem operations or affecting data
availability.
nondisruptive installation. The physical installation of
additional components or capabilities to a unit while nor-
mal operations continue without interruption.
nondisruptive removal. Physical removal of compo-
nents or capabilities from a unit while normal operations
continue without interruption.
nonvolatile storage (NVS). In VSM, a redundant solid-
state repository in a VTSS disk array controller that re-
tains its data when AC power is removed, achieved by
switching to a battery-backup DC power system when its
primary power source fails. In VTSS, NVS is used to
temporarily store host data before it is destaged to the
back-end disk arrays. Contrast with volatile memory
.
NPDC. New Product Development Center.
N_Port. Node Port.
NLOGIN. Node Login.
NL_Port. Node Port on Loop.
NOS. Network Operating System.
NVS. See nonvolatile storage
.
O
ODLI/ODL-I. Optical data link interface. In VSM, a fiber-
optic interface between a VTSS front end and back end.
OFC. Open Fibre Control.
ohmmeter. A test instrument used to measure the resis-
tance of a material, using ohms (Ω) as the unit of mea-
surement.
open systems. Products designed to operate in a multi-
platform computing environment.
operating system (OS). A program responsible for
management of system resources.
outlet. A wall receptacle that is connected to a power
supply and equipped with an electrical socket designed
to accept a compatible plug.