Chapter 3 Hardware Installation 19
▼ To Verify Proper Installation in SPARC
Platforms
1. Enter the show-devs command at the ok prompt to list the installed devices.
The single and dual port HBAs can be identified in the output containing the
SUNW,emlxs@n and SUNW,emlxs@n,1 node names, where n is usually a single-digit
number from 0 to 9.
Slow Blink Flashing Restricted Offline Mode,
test active
Fast Blink Off Debug Monitor in Restricted
Mode
Fast Blink On Not defined
Fast Blink Slow Blink Debug Monitor in Test Fixture
Mode
Fast Blink Fast Blink Debug Monitor in Remote
Debug Mode
Fast Blink Flashing Not defined
TABLE 3-2 LED Indicator Status Definitions (Continued)
Green LED Yellow LED State