Filter
Top Products
Chapter 4 Software Installation 31
Red Hat and SuSE OS Diagnostic Support
Diagnostic support is provided by the Emulex lputil and HBAnyware utilities.
They support the following functions:
■ List adapters
■ Adapter information
■ Firmware maintenance
■ Reset adapters
To verify the installation, follow the instructions provided in the “View HBA
Information using lputil” section of the Emulex Driver manual.
Creating a Linux Boot Disk
Emulex adapters enable you to load and boot the Linux operating system from a
SAN-attached drive. You can use either the Emulex driver for Linux provided on
your Linux distribution CD or, if you are using a different Linux driver, create a
driver disk.
To boot from SAN directly using your distribution CD, follow the directions
included with that CD. Refer to the Emulex web site for additional requirements to
boot from a SAN.