Filter
Top Products
C-2
X6DH3-G2/X6DHi-G2 User's Manual
Primary Master(=PM) Yes Yes No No No No
Primary Slave(=PS) Yes No Yes No No No
Secondary Master(=SM)
Yes No No Yes No No
Secondary Slave(=SS) Yes No No No Yes No
SATA Port0 No SM SM PM PM PM
SATA Port1 No SS SS PS PS PS
*Note: (No=Not Present, Yes=Present) Also, if Logical Primary is
selected, the IDE channels are no longer available.
The Enhanced Mode:
In this mode, system BIOS will automatically search for all available IRQs for the
use of HDD. For newer Operating Systems that support the Enhanced Mode, such
as Windows XP, Windows 2000, and Windows 2003, you can set SATA and PATA
to the Enhanced Mode. (*The newer Operating Systems can accommodate both
Enhanced Mode and Combined Mode and support up to 6 ATA devices.)
(*Please refer to the "Advanced Chipset Control" under the "Advanced" Setup in
the BIOS for the selection of Combined Mode or Enhanced Mode,).
The Combined Mode:
In this mode, system BIOS assigns the traditional IRQ 14 and IRQ 15 for the use
of HDD. Up to 4 ATA devices are supported by this mode.
Within the Combined Mode, the following three modes are supported:
*Non-Combined Mode: Parallel ATA only :with the maximum of 4 devices sup-
ported;
*Non-Combined Mode: Serial ATA only: with the maximum of 2 devices sup-
ported;