Filter
Top Products
What’s in this guide? Getting started Making calls Using the phone book In-call features
Advanced settings
Advanced settings
33
D14503.01 USER GUIDE TANDBERG QUICK SET C20—July 2009
About the advanced settings
The Advanced settings lets you define extra softbutton functions; alter
the IP settings of the system; utilize the Advanced configuration options
and finally change the Administrator’s password.
Your Quick Set C20 can be configured through its web interface, but it may
also be configured through the Advanced configuration. This is normally
carried out by your system administrator, who may have password
protected the access to the Advanced configuration.
Starting from the Home menu, navigate down to Settings and press the
key.
Then navigate to Advanced and press the
key again to display the
options available (shown below).
Advanced configuration & password
The Advanced configuration is aimed at system administrators only and
may have been password protected by your system administrator. Unless
you are the system administrator you should leave these settings as they
are.
The IP settings (not shown) are also aimed at system administrators.
The Advanced configuration settings and the IP settings are described
in the Administrator Guide for the Quick Set C20. This guide can be
downloaded from www.tandberg.com. Look for Support and then
Documentation.
The password may not have been set. If you decide to give your
system a password, take care. If you forget your password or
otherwise forget it, contact your TANDBERG representative for
help.