Filter
Top Products
What’s in this guide? Getting started Making calls Using the phone book In-call features
Advanced settings
Getting started
4
D14503.01 USER GUIDE TANDBERG QUICK SET C20—July 2009
After wake-up, the screen will typically look like this:
Waking up the system
To make a call you need to wake up the system from standby. However, if
someone calls you, the system will wake up by itself.
• To wake up the system just pick up the remote control or press any key.
You may have to point the remote control towards the system to make it
discover you.
• The system will now show the welcome screen, which contains the
main menu and it will display the main camera image in the background.
• The IP number and/or the system name will be displayed in the upper
left corner.
• The IP number is the dial-in number of your system.
• The screen will also indicate if there are any calls you have missed.
Should the system fail to respond to the remote control or to incoming
calls, make sure that:
• The system is connected to line voltage
• The remote control has working batteries
• The internal cables, such as the monitor cable and/or the camera
cables are properly connected, cf. the installation sheet.
The IP number or your URI is the
dial-in number of your system and
will appear here.
Date and time
of day.
Softbuttons
(described on
the following
pages).